Under Cabinet Wine Glass Rack – Start Saving Space Today

by Rachel Turner

An under cabinet wine glass rack is a good way of preventing breakages from occurring on the wine glassware. The rack is convenient when you have only a little space to spare. The wine enthusiast metal stemware racks mount under the board that is placed on top of the cabinet. This helps you to utilize the space in the cabinet fully. It also enables you to fully utilize the wall or ceiling space. The under cabinet rack is not expensive.

A chrome rack holds 18 wine stems. There are various types of wine stem racks that can be mounted under a top board of the cabinet. Since there are many racks that are mounted in this way, there are supplied with a paper template that enables you to puncture through some Xs. These are meant to make you understand where you should drive screws that are used when fixing the rack.

When mounting the rack, you have to determine the point where the screw holes are going to be located. If a template has been supplied with the rack, you should use it during the installation. You will need to find the right tools for the mountain. These tools are a hammer, screwdriver, nails and screws. You have to figure out the point where each screw should be fixed.

Before you start fixing the under cabinet wine glass rack, you should cross check whether you are right before tapping a nail into the wood. Tap about 1/8″ of the nail to the wood at the spot where you earlier marked using a pencil. You can then use the drill bit for drilling a hole that is a bit smaller compared to inner shank of a screw.

You should be careful to ensure that it will not poke its way to the top of your cabinet board. This is done by wrapping some masking tape at the point which is the measurement of screw’s depth. You know that you have drilled enough when the drill reaches the line with the masking tape. You should make sure that the full length of a screw will not go through top part of a cabinet.

If you are intending to mount an under cabinet wine glass rack but you do not have a drill, you should you should use dry soap to rub the screw. You should fix it by applying more force when you are turning the screwdriver to shove the screw up. The soap makes it easier for a screw to be driven into the wood when there is no pilot hole that had been prepared.

The other cheap under cabinet wine glass rack alternative is to go for a rack that is made using metal wire. This rack holds nine wine stems. It is sold at a low price and it is convenient as not everyone is a wine connoisseur with many glasses for all kinds of wine. There are wire racks that are screwed onto cabinet tops that hold 6 up to 18 glasses. It is important to first measure the cabinet to ensure that you get a fitting rack.

Leave a Comment